DESIGN OF A MODIFIED FUEL PUMP BASED ON A DC DYNAMO AS AN AIRCRAFT REFUELING TOOL IN THE HANGAR OF THE SURABAYA AVIATION POLYTECHNIC

Penulis

  • Cholik Setijono Politeknik Penerbangan Surabaya
  • Marcelo Fernando F. R. Politeknik Penerbangan Surabaya
  • Ajeng Wulansari Politeknik Penerbangan Surabaya

DOI:

https://doi.org/10.46491/icateas.v2i1.1709

Kata Kunci:

fuel pump, DC dynamo, refueling, Cessna aircraft and TBM

Abstrak

The DC dynamo-based fuel pump on the refueling tool is a practical activity that has been carried out in the AMTO 147 D-010 hangar at Surabaya Aviation Polytechnic. Refueling procedures on training aircraft that have been carried out, especially on Cessna and TBM aircraft, there is one problem that must be resolved immediately, namely the ineffectiveness and inefficiency of the fuel pump tool used during refueling. Because it still uses manual or still uses human labor. The method used in making the design of the fuel pump tool on the electric refueling tool is with a fuel pump or pump as a tool during refueling activities. So it is hoped that with this the cadets can find out refueling learning and activities before the run up of the aircraft can easily find out the amount of fuel the aircraft needs. The result of the design of the fuel pump tool on electric refueling by using a fuel pump tool is that cadets can carry out refueling activities for Cessna and TBM aircraft easily and can speed up the refueling needed and cadets avoid other human errors.

Diterbitkan

2023-11-08 — Diperbaharui pada 2023-11-09

Versi

Cara Mengutip

Setijono, C., Fernando F. R., M., & Wulansari, A. (2023). DESIGN OF A MODIFIED FUEL PUMP BASED ON A DC DYNAMO AS AN AIRCRAFT REFUELING TOOL IN THE HANGAR OF THE SURABAYA AVIATION POLYTECHNIC. Proceeding of International Conference of Advanced Transportation, Engineering, and Applied Social Science , 2(1), 564-568. https://doi.org/10.46491/icateas.v2i1.1709 (Original work published 2023)