AUTOMATIC TOOLBOX DESIGN WITH SMART VENDING MACHINE METHOD BASED ON INTERNET OF THINGS

Authors

  • Rizqi Maula Hamdani Politeknik Penerbangan Surabaya
  • Yudhis Thiro Kabul Yunior Politeknik Penerbangan Surabaya
  • Bambang Junipitoyo Politeknik Penerbangan Surabaya

DOI:

https://doi.org/10.46491/icateas.v3i1.1932

Keywords:

ESP32, Face Recognize, Motor Stepper, Arduino Nano, Orange Pi, Internet of Things

Abstract

Toolbox storage of some useful equipment to make it easier for technicians to take a tool. Smart vending machine is the latest innovation from vending machines to dispense goods and can record the results of dispensing the tool. This method begins with the formulation of problems, making tools and writing the final project. Equipped with a camera and web as a vending machine security. There are inputs that are useful for setting controls on the tool then the results of the control are output on the web and 16x2 LCD. Stepper motor testing has been tested with a period of 10 seconds, 60 seconds and 120 seconds then face recognize testing takes at least 7 seconds to detect faces. The tool runs optimally and effectively

Downloads

Published

2024-12-06

How to Cite

Hamdani, R. M. ., Yunior, Y. T. K. ., & Junipitoyo, B. (2024). AUTOMATIC TOOLBOX DESIGN WITH SMART VENDING MACHINE METHOD BASED ON INTERNET OF THINGS. Proceeding of International Conference of Advanced Transportation, Engineering, and Applied Social Science, 3(1), 305–309. https://doi.org/10.46491/icateas.v3i1.1932

Issue

Vol. 3 No. 1 (2024): Proceeding of ICATEAS (International Conference of Advanced Transportation, Engineering and Applied Social Science)

Section

Electrical Engineering