NUMERICAL STUDY OF TWO SAVONIUS TURBINES CONFIGURATION SIDE-BY-SIDE WITH DIRECT TURN

Authors

  • Ahmad Radix Dharma Cahyo Politeknik Penerbangan Surabaya
  • Gunawan Sakti Politeknik Penerbangan Surabaya
  • Bambang Junipitoyo Politeknik Penerbangan Surabaya

DOI:

https://doi.org/10.46491/icateas.v3i1.1903

Keywords:

Coefficient of Power, Coefficient of Moment, drag, speed torque flow wind, side-by-side, turbine Savonius

Abstract

This study aims to optimize the performance of Savonius wind turbines in a side-by-side configuration using a two- dimensional numerical simulation method with a k-ε enhanced wall treatment turbulence model in ANSYS 18.2. The simulation was carried out with a wind speed of 5 m/s and a distance between the turbine shafts S/D = 5.5, with a blade diameter D = 60 mm. The results showed an increase in the power coefficient and performance of the Savonius turbine due to the flow interaction between the two turbines rotating clockwise, especially when the distance between the turbines is closer to the wall.

Downloads

Published

2024-12-06

How to Cite

Cahyo, A. R. D. ., Sakti, G., & Junipitoyo, B. (2024). NUMERICAL STUDY OF TWO SAVONIUS TURBINES CONFIGURATION SIDE-BY-SIDE WITH DIRECT TURN. Proceeding of International Conference of Advanced Transportation, Engineering, and Applied Social Science, 3(1), 53–58. https://doi.org/10.46491/icateas.v3i1.1903

Issue

Vol. 3 No. 1 (2024): Proceeding of ICATEAS (International Conference of Advanced Transportation, Engineering and Applied Social Science)

Section

Aerospace Engineering